NUCLEOGUARD HPLC Guard Column (analytical), NUCLEODUR Universal RP, 4x2 mm
For protection of your main HPLC column from contamination, it is recommended to use guard columns. These short columns are placed into a guard column holder. The guard column holder in combination with a guard column inside is installed between the injector and the HPLC column. This installation prevents chemical impurities to reach the main column. Because a contamination could form an irreversible bond with the column packing material (stationary phase) and this can result in shorter column life. If you want to prolong the lifetime of your main column, then these short columns can help you.
| Base material | Silica gel |
|---|---|
| Brand | UNIVERSAL |
| Carbon content | Not available or proprietary |
| Column inner diameter | 2 mm |
| Column length | 4 mm |
| Eluent in HPLC column | Acetonitrile – water |
| Endcapped | Yes |
| Hardware | Stainless steel |
| Hazardous material | No |
| Method | HPLC, analytical |
| Mode | Reversed phase (RP) |
| Particle shape | Spherical |
| Particle size | Not available or proprietary |
| Particle type | Fully porous particles (FPP) |
| pH stability | 2.0–8.0 |
| Phase | UNIVERSAL RP |
| Pressure stability (max) | 310 bar / 4500 psi |
| Recommended application(s) | Guard column, ideal protection for your main column, HPLC |
| Specific surface according to BET | Not available or proprietary |
| Storage temperature | 15–25 °C / 59–77 °F |
| Surface chemistry | Not available or proprietary |
| Temperature stability (max) | 60 °C |
| Type | EC HPLC guard column (analytical) |
| USP listing | Not available or proprietary |
Related Products
Content 3 Piece(s)
Content 3 Piece(s)
Content 3 Piece(s)
Content 3 Piece(s)
Accessories
Content 1 Set(s)