Login
     
  
   
CHROMABOND® Flash Safety System  
Features

Advantages: holders with cartridges

40 mm ID

65 mm ID
  maximum safety during use under pressure
increased column life time
high separation efficiency
excellent reproducibility
high loadability
easy and flexible installation, even with different instruments / hardware
the CHROMABOND® Flash Safety System
  can be used as stand-alone system for any pump / detector / fraction collector combination with 1/4"-28 fittings
  CHROMABOND® safety holder, available in 5 different sizes (90, 180, 240, 360, 750/1000 ml)
  holder can be equipped with either luer lock inlet, 1/4"-28 threads or Swagelok® connection
  cartridges with luer lock exit for a safe and pressure-stable tube connection
  maximum safety up to 9 bar


Safety and column lifetime
Both points are closely connected for the CHROMABOND® Flash Safety System. The metal casing around the cartridge increases the security for the user compared to pure plastic cartridges without casing.
Our CHROMABOND® Flash Safety System is tested and proofed up to 9 bar. This increases the flexibility due to the use of a broader range of feasible solvents (i. e. with higher viscosity) and reduces the analysis time by higher possible flow rates. The metal casing inhibits the deformation or twisting of the cartridge and through this, avoids a damage of the packing by swelling or solvent effects. The increase in cartridge lifetime is now measured in days, not only in hours or a few runs.
 


CHROMABOND® Flash holders · Ordering information

Description Dimensions Pack of REF
CHROMABOND Flash holder 90, complete with cap (luer lock, female) and casing 60 x 108 mm 1 730896
CHROMABOND Flash holder 180, as above 60 x 187 mm 1 730897
CHROMABOND Flash holder 240, as above 60 x 232 mm 1 730899
CHROMABOND Flash holder 360, as above 60 x 318 mm 1 730898
CHROMABOND Flash holder 750, complete with cap,
star-shaped distribution device, seal, retaining ring and casing
95 x 300 mm 1 730834
       


CHROMABOND® Flash cartridges with luer lock · Ordering information

Description Dimensions Adsorbent SiOH Adsorbent C18 ec
  Length
[mm]
ID
[mm]
adsorbent
weight [g]
pack of REF adsorbent
weight [g]
pack of REF
CHROMABOND Flash MN-90 114 40 40 10 730810 55 2 730814
CHROMABOND Flash MN-180 194 40 90 10 730811 110 2 730815
CHROMABOND Flash MN-240 240 40 130 10 730784 150 2 730816
CHROMABOND Flash MN-360 325 40 180 5 730813 220 1 730817
CHROMABOND Flash MN-750 270 65 330 5 730835 440 1 730836
CHROMABOND Flash MN-1000 365 65 450 2 730838 620 1 730837
For operation of these cartridges the corresponding holder is required (see above)

 Print   
   
  
Copyright 2009 by MACHEREY-NAGEL GmbH & Co. KG   Imprint / Impressum Privacy StatementTerms Of Use