|
|
|
|
Photometer VISOCOLOR® PF-11
Portable photometer for field and laboratory use
| The Photometer PF-11 closes the gap between the visuell - colorimetric VISOCOLOR® test kits and the photometric water analysis system NANOCOLOR®. |
|
From VISOCOLOR ® to NANOCOLOR ® |
|
The photometer PF-11 offers an easy start into photometric water analysis. When evaluated with PF-11 our economically priced VISOCOLOR® reagents, which have been successfully used in our colorimetric or photometrictest kits for years, give rapid and accurate results, which are even more precise than a visual evaluation. Photometry allows reliable measurements, independent of surrounding light conditions or personal
colour assessments. If there is a need for more accurate results, a lower detection limit or simply, if a large variety of test kits with various measuring ranges is requested, the use of NANOCOLOR® tube
tests is the choice. |
| Experience precision and increase accuracy |
|
| Self-explanatory user guidance |
|
- All tests and menu items can be activated fast and easily. The photometer can be operated without any complex and time-consuming training
|
| Manual with test instructions, presented as pictograms |
- Safe test procedures without complex instructions
|
|
Assure results and meet specifications |
|
IQC according to ISO 9001 with NANOCONTROL NANOCHECK |
- Conformance to requirements of internal quality control (IQC) and protection towards supervisors and authorities
- Fast and easy control of photometric accuracy of the VISOCOLOR®
PF-11 with NANOCONTROL NANOCHECK
(Cat. No. 925 701) by the user himself
|
| Convenient export of data |
- Easy transfer of measured results and spectra to various common PC formats (e.g. MS Excel)
- Direct print-out of measured data with the NANOCOLOR® thermal printer (Cat. No. 919 16)
|
| Enjoy flexibility and be prepared for the future |
|
|
In the field and in the lab
|
|
4 rechargeable batteries with external charger, sufficient for at least
1000 measurements or via socket with a separate mains adaptor (9 V/1.5 A)
|
| Technische Daten |
|
| Type: |
Single beam filter photometer |
| Light sources: |
Tungsten lamp |
| Optical system: |
Manuel filterwheel with 6 coloured glassfilters |
| Wavelength: |
380/405/470/520/605/720 nm |
| Wavelength accuracy: |
± 10 nm |
| Wavelength selection: |
Manuell |
| Spectral bandwidth: |
30 - 60 nm |
| Photometric range: |
± 2 E |
| Measuring modes: |
More than 100 preprogrammed calibrations, Extinction |
| Cuvette holder: |
Round tubes 14 mm ID |
| Display: |
LCD-Display 2 x 16 characters, 5 mm high |
| Operation: |
Display user guidance, foil-covered push-buttons |
| External light: |
Insensitive, open cuvetteslot |
| Interfaces: |
Bidirektionale serielle RS 232 |
| Operating range: |
10-50 °C , max. 90% relative humidity (without condensation) |
| Power supply: |
4 rechargeable batteries with external charger, sufficient for at least
1000 measurements or via socket with a separate mains adaptor (9 V/1.5 A) |
| Dimensions L / B / H: |
195 / 100 / 40 mm |
| Weight: |
470 g incl. rechargeable batteries |
| Warranty: |
2 years |
This appliance complies with the following EC Directives:
– 73/23/EEC of 19.02.1973 – Low Voltage Directive
– 89/336/EEC of 03.05.1989 (including Amendment Directive92/31/EEC) – EMV-Directive |
| Ordering information |
|
| Photometer PF-11, complete in a case, incl. manual, 4 rechargeable batteries, charger, 2 empty test tubes and funnel for sampling |
Cat.-No. 919 05 |
| External mains adaptor (100 – 240 V) 9 V / 1.5 A |
Cat.-No. 919 06 |
|
| |
|
 |